Cleaning The Appliance; Cleaning And Maintenance - essentiel b DELFINO Notice D'utilisation

Vacuuming
1.
Take the appliance off its base.
2.
Select the appropriate accessory (if one is needed - see previous
section) and insert it into the end of the water and dust container.
3.
Set the on/off switch to position "I" (on) to turn the vacuum cleaner on
(Fig. 5).
4.
I When you have finished vacuuming, move the on/off switch to position
"0" (off) and replace the appliance on its base to charge the battery and
get it ready for the next time it is needed (Fig. 5).
0
Figure 5

cleaning and maintenance

Caution!
Always unplug your appliance before cleaning and
•
check that the on/off switch is set to position "0".
Never immerse the appliance, charger base or
•
mains adapter in water or other liquids.
Do not use harsh cleaning products or abrasive
•
sponges.
14
V.3.0
cleaning and maintenance
All manuals and user guides at all-guides.com

Cleaning the appliance

For optimum performance, empty and clean the appliance regularly. If the container and filter are
clogged with dirt, vacuuming performance will drop.
1.
Press the dust container lid open button to remove it from the motor unit (Fig. 6).
2.
Remove the filter holder/filter/pre-filter assembly so that you can extract the motor unit from the
container (Fig. 7).
3.
Empty the contents of the container into a dustbin and if necessary, clean inside it with a slightly
moist soft cloth and allow to dry completely.
4.
Turn the pre-filter anticlockwise to separate it from the filter holder, then do the same with the filter
to separate it from the filter holder (Fig. 8). Take care not to damage the filter inside.
Figure 6 Figure 7
Figure 8
CLICK
Figure 9 Figure 10 Figure 11
15
V.3.0
cleaning and maintenance