Control Panel - Midea MLE41N1AWWC Manuel D'utilisation Et Instructions D'installation

Control panel

# ITEM
1
Power button
2 Cycle selector
3 Digital display
–Time Adjust +
4
button
Wrinkle Care
5
button
/Start Pause
6
button
7 Cycle status indicators
8 My Cycl e button
9 Dry Leve l button
10 Child Lock
11 Temp button
6
Press to turn your dryer on or o . If your dryer is on for more than 10 minutes without any
buttons being pressed, it automatically turns o .
Turn to select the cycle for the type of load. The cycle you select determines the heat control
for the cycle. The Normal, Delicates, Casual, Towels, Sanitize, Heavy Duty, and Bulky
cycles are Sensor dry cycles. The Quick Dry, Time Dry, and Air Fluff cycles are Manual dry
cycles. For more information, see Dryer options and settings on page 26.
Displays the time while you are pressing the –Time Adjust + button to set the time for the
Quick Dry, Time Dry, or Air Fluff cycle.
Displays the remaining cycle time while your dryer is running.
Press repeatedly to select the drying time. This button only works for the Quick Dry, Time
Dry, and Air Fluff cycles.
Press once to add the Wrinkle Care step to the drying cycle. Press again to cancel.
Wrinkle Care provides approximately 90 minutes of intermittent tumbling in unheated
air at the end of the cycle to reduce wrinkling. The load is already dry and can be removed at
any time during the Wrinkle Care cycle.
Press to start or pause the drying cycle. When you pause the cycle, you can add items to the
dryer, but your cannot change any settings.
Indicate what stage in the drying cycle your dryer is in. For example, when your dryer is in
the cooling down stage of the cycle, the Cooling indicator lights. When the cycle is
complete, the Clean Filter indicator
Press and hold for three seconds to save your favorite drying cycle. Press once to load your
favorite cycle setting.
Press to select the dryness level. Di erent dryness levels result in
clothes to be ironed manually, select a lower dryness level. For more information, see Dryer
options and settings on page 26.
Press and hold the Dry Level and Tem p buttons at the same time for three seconds to
turn on the child lock function. Press and hold for three seconds to turn o the function.
When the child lock function is turned on, the only button that works is the Power button .
Press to select the drying temperature. Your can select High, Medium, Low, Ultra Low, or
No Heat. Temperature changes are only available on Quick Dry and Time Dry settings. For
more information, see Dryer options and settings on page 26.
INSTALLATION INSTRUCTIONS
DESCRIPTION
hes to remind you to clean the er.
erent drying times. For