User Maintenance Instructions; Error Code - Midea MLE41N1AWWC Manuel D'utilisation Et Instructions D'installation

PROBLEM
Odor remains in
clothing even after
washing.
Clothing is still
wrinkled after using
the Wrinkle
Care setting.
There is lint on the
clothing.
Understanding the error codes
Your dryer is equipped with an automatic error-monitoring system to detect and diagnose problems at an early
stage.

ERROR CODE

C9
E4
E5
26

USER MAINTENANCE INSTRUCTIONS

Fabrics containing strong odors should be rewashed utilizing desired wash cycle.
Small loads of one to four items work best.
If the dryer load is too large, items cannot tumble freely. Try loading fewer items.
Make sure that the items in the dryer load are similar. The Wrinkle Care setting works best
when the items in the dryer load are similar-type items.
Check pockets thoroughly before washing and drying clothes. Things like paper or tissue can
break up into small pieces that turn into lint.
Clean the lint filter before every cycle. Some loads that produce high amounts of lint can clog
th
Some fabrics are lint producers (like a fuzzy white cotton towel) and they should be dried
separately from clothes that are lint trappers (like a pair of black linen pants).
Divide larger loads into smaller loads for drying.
POSSIBLE CAUSE
The PCB failed.
The humidity sensor failed.
The temperature sensor failed. Contact authorized service
SOLUTION
SOLUTIONS
Contact authorized service
personnel for help. DO NOT use
your dryer.
Your dryer will complete the
current operating cycle but items
could be over dried. Your dryer can
still operate under the Time cycles.
Contact authorized service
personnel for help.
personnel for help. DO NOT use
your dryer.