Product Disposal; Removing The Battery - Daga MT-400 Mode D'emploi

All manuals and user guides at all-guides.com
ENGLISH
the device to cool down prior to storage.
Ensure that the device is unplugged prior to cleaning it.
This device may only be cleaned with a damp cloth, and chemical
products must never be used for the same.

PRODUCT DISPOSAL

This product complies with European Directive 2012/19/
EU on electrical and electronic devices, known as WEEE
(Waste Electrical and Electronic Equipment), provides
the legal framework applicable in the European Union for
the disposal and reuse of waste electronic and electrical
devices. Do not dispose of this product in the bin instead going to
the electrical and electronic waste collection centre closest to your
home.
The product may contain batteries. Remove them before
disposing of the product and dispose in special containers
approved for this purpose.

REMOVING THE BATTERY

The battery must be removed from the appliance prior to discarding it.
Ensure that the multi-function shaver is fully out of battery.
The appliance should be disconnected from the power to remove the
battery.
Follow the steps below, which explain how to remove the battery:
1.Remove the head of the unit.
2.Extract the on/off switch (B) by prying it open with a flat-blade
screwdriver.
3.Insert a flat-blade screwdriver underneath the product and exert
pressure to remove the piece.
4.Once it has been released, slide it out, in the direction of the head,
until lit has been fully released.
Apply a drop of oil on one of the edges
of the blades for their maintenance, and
turn on the device for a few seconds to
distribute it. This should be done when
you notice a certain amount of difficulty
during the trimming operation.(Fig. 3)
The heads can be washed under the tap.
Do this by removing the head (Fig.4), then
let it dry well before repositioning them.
11