Daga MT-400 Mode D'emploi page 12

All manuals and user guides at all-guides.com
ENGLISH
5.Remove the four screws that join the two halves of the product.
6.Open the product by separating the two halves of the casing.
7.Remove the PCB set with the battery and cut the wires that connect
the assembly to the engine and to the input connector of the adapter.
8.Finally, cut the two metal sheets connecting the battery to the PCB
or unweld it, whichever is easier.
The battery must be disposed of according to the appropriate safety
standards.
1
5
We hope that you will be satisfied with this product.
12
2 3
6 7
4
8