Maintenance And Cleaning - Daga MT-400 Mode D'emploi

All manuals and user guides at all-guides.com
ENGLISH
B&B TRENDS SL disclaims all liability for damages that may occur to
people, animals or objects, for the non-observance of these warnings.
CHARGING THE APPARATUS
Prior to using the multi-functional trimmer for the first time, charge
the product for 10-12 hours, which will only require 8 hours for a full
charge thereafter. Ensure that the appliance is switched off, before
plugging in the power adaptor pin into the unit (Fig. 1) and then plug
the adapter into the wall socket (fig. 2).
(fig. 1) (fig. 2)
The charging display will light up in red.
To preserve the life of the batteries, let them completely run out every
six months and then charge them for 10-12 hours.
INSTRUCTIONS FOR USE
Prior to switching on the appliance, select the desired head (C,D or
E). Selecting the C head allows you to use the guide comb. Set it into
place by taking it by the side, entering it in the side of the blade and
choosing the desired measurement. Then press the on/off switch (B)
Pull upwards to remove the cutting comb.
Remove the heads by stretching outwards (Fig. 4) and set them in
place by positioning it bottom-up until you hear the clip.( Fig.5)
Simply slide the power switch (B) backwards in order to turn the
product off.

MAINTENANCE AND CLEANING

Allow the product to fully lose all its charge when you do not intend
to use it for an extended period of time to prolong its shelf-life. Allow
10