iComfort IC1118 Manuel De L'utilisateur page 4

• Sitting in the massage chair before it is completely assembled could result in permanent
damage to the chair and personal injury.
• This massage
plugged into an appropriate AC wall outlet.
• If the massage chair
can unscrew the fuse located in the switch box at the bottom left of the chair in the back.
A) Unplug the AC connector of the chair from the wall outlet.
B) Gently unscrew the fuse cover and the fuse will come out at the same time
Use a same size and type of fuse to replace the old one and then cover the lid. You can call
iComfort® at 1-866-967-7333 ext 227 if you need help.
CAUTION: Never substitute a missing part with one of your own. If a part is missing, contact
customer service at: 1-866-967-7333 ext 227
Unpacking
1) Remove the massage chair, cushions and accessories from the main box.
2) Remove all plastic wraps.
3) Slowly lift the backrest up to approximately 120 degrees until you hear a light 'click' sound.
This signifies the backrest is secured to the seat area.
Remote control and holder
Install remote control and holder.
the screws provided.
chair is equipped with a cord having a grounding conductor. The cord must be
fuse is burned out, please turn the chair off and unplug the power. You
Attach the remote control holder underneath the right armrest with
P a g e | 3