Operating Your Fan - Impecca FANFAIR FSF-1813 Manuel De L'utilisateur

ASSEMBLING YOUR FANFAIR 18" HIGH VELOCITY 3 IN 1
INDUSTRIAL FAN - DESK FAN
Assemble the desk stand as shown in the diagrams below.
1. Connect the middle tube with the right and left curved tubes. Secure with screw, then use four screws to
fasten the rubber end (U) on the pipe base.
2. Use screw and nut to attach the motor to the curved tube and base.
ASSEMBLING YOUR FANFAIR 18" HIGH VELOCITY 3 IN 1
INDUSTRIAL FAN - WALL FAN
1. Assemble the Desk fan as described above.
2. Use screws (P) to attach two hooks (R) onto the wall where you want to position the fan.
3. Hang the fan base on the hooks. See the diagram below.

OPERATING YOUR FAN

Turn the power on to the mains socket then switch on the fan by settirotating one of the three rotational speeds
'1', '2',or'3' on the control panel ('3' is the fastest speed).Button '0' switches the fan 'off'.
Plug the fan in and set the desired speed to 1 (low), 2 (medium), or 3 (high). Set the switch to 0 to turn the fan off.
All manuals and user guides at all-guides.com
6