Operating The Fan; Care, Cleaning, And Maintenance - Impecca FanFair FTF-3000 Guide De L'utilisateur

OPERATING THE FAN

1. Set the fan on a level and dry surface.
2. Make sure the switch is in the OFF (center) position.
3. To operate the fan, rotate the switch knob clockwise to the desired
speed: 1 - Low, 2 - Medium, 3 - High. These settings do no oscillate
(turn).
4. To oscillate the fan, rotate the switch knob counter-clockwise to the
desired speed with oscillation: 1 - Low with oscillation, 2 - Medium with
oscillation, 3 - High with oscillation.
5. After turning the fan off, always be sure to unplug it from the electrical
outlet.

CARE, CLEANING, AND MAINTENANCE

Be sure the fan switch is in the "OFF" position and unplugged before cleaning.
• Use only a soft, damp cloth to gently wipe the fan. To clean inlet and outlet ribs,
use a common household vacuum.
• DO NOT immerse the fan in water and never allow water to enter the
Motor Housing.
• DO NOT use gasoline, paint thinner or other abrasive chemicals to clean the fan.
8