Impecca FANFAIR FSF-1813 Manuel De L'utilisateur page 5

ASSEMBLING YOUR FANFAIR 18" HIGH VELOCITY 3 IN 1
INDUSTRIAL FAN - STAND FAN
1. Attach base cover (L) to the upper base shaft (K). Assemble the height adjustment nut (J) and upper base
shaft (K) on the base (N) and fasten using four screws. See diagram below.
2. Loosen the height adjustment nut (J), pull out the extendable shaft (I) from the upper base (K) shaft, and
fasten the screw ring connecting the motor (E) to the extendable shaft (I). See diagram below. Then use
screw to fasten the motor.
3. Put the rear grill (D) on the motor and fasten it with four screws (C). See diagram below.
4. Push the blade (B) onto the motor shaft, using the screw to fasten it. See diagram below..
5. Place the front grill (A) onto the rear grill (D) and secure tip lace using the grill retaining clips. Using the screw
and nut (V), screw on the nut to secure the grills together. See diagram below.
All manuals and user guides at all-guides.com
5