Xoro HTL2722W Manuel D'emploi page 95

INSTALLATION / INITIAL SETUP
Setup in PC mode
Auto Sync
This item is to automatically setup the position
settings of the current PC signal.
Press the ENTER key to start auto sync.
Phase
This option adjusts the phase of the PC sig-
nal.
The scale of control should be (-10) – (+10).
Clock
This option adjusts the clock of the PC signal.
The scale of control should be (-10) – (+10).
H Position
This option adjusts the H position of the im-
age.
The scale of control should be (-10) – (+10).
V Position
This option adjusts the V position of the im-
age.
The scale of control should be (-10) – (+10).
Reset
This item resets the above settings to default
value.
Press the SELECT key to reset settings.
All manuals and user guides at all-guides.com
Auto Sync
Phase 0
Clock 0
H Position 0
V Position 0
Reset
40