Kasanova ZSU000001 Manuel D'instructions page 9

ELECTRIC ICE SHAVER
tially hot appliance. Pay special attention to the electrical cord to prevent it
from touching a hot surface.
• This appliance must be used only for the purposes it was designed for, (i.e.
for crushing/shaving ice in the home).
IN PARTICULAR:
• Never touch the appliance with wet or damp hands.
• Never use the appliance barefoot.
• Never pull the electrical cable or the appliance itself to remove the plug from
the electrical socket.
• Avoid all contact with any moving parts of the appliance.
• Never leave the appliance exposed to the elements (rain, sunshine, etc.).
• Never let children or those unable to operate the appliance use it unatten-
ded. Do not leave the unit unattended while plugged into a power source.
• Before any cleaning, maintenance, assembly or disassembly, make sure
that the ice shaver is disconnected from the main power supply by unplug-
ging it.
• Should the appliance be out of order and/or operating inefficiently switch it
off and do not attempt to tamper with it. For any repairs, approach an autho-
rized service center only and request the use of
original spare parts. Failure to comply with the above might result in com-
promised safety of the appliance.
• Should you decide to stop using the appliance, it is advisable to render it
unusable by cutting the electrical cable after unplugging it from the main
power supply.
• Furthermore, it is advisable to render all hazardous parts of the applian-
ce harmless, particularly for children, who might play with the discarded
appliance.
• Installation must be carried out in compliance with the manufacturer's
instructions. Incorrect installation can cause damage to people, animals or
objects for whom the manufacturer may not be held responsible.
• In order to avoid dangerous overheating it is advisable to unwind the electri-
cal cable completely and use the appliance as recommended in the "Usage
Precautions" paragraph.
• Never leave the appliance plugged in when not needed. Unplug from the
power supply plug whenever the appliance is not in use.
• Never obstruct the openings or slits for ventilation and heat dissipation.
• Should the electrical cable of this appliance become damaged, have it re-
placed by a manufacturer authorized after-sales service center only becau-
se special tools are required.
• The manufacturer reserves the right to make any changes considered
necessary for industrial, commercial or design improvements or to comply
All manuals and user guides at all-guides.com
9