Press the "Standby" button to turn to DAB mode.
If you were listening to a DAB station when you switched the radio off then this station will be automatically
selected when you switch the radio back on.
Changing DAB stations
If you are not already in DAB mode, press and release the 'DAB/FM' button on the top of your radio
1.
until 'DAB' is displayed.
Press the "Prev" or "Next" button on the top of the radio to go up or down of the station. "Prev"
2.
button is for down station, and "Next" button is for up station.
Press the 'Select' button, the radio will instantly tune to that station and begin to play
3.
Scanning for DAB stations
If you are not already in DAB mode, press and release the 'DAB/FM' button on the top of your radio
1.
until 'DAB' is displayed.
Press and release the 'Scan' button on the top of your radio to carry out a scan. 'Searching...' will be
2.
displayed and a progress bar will show the progress of the scan and the number of stations found
during the scan will also be displayed.
You can also press the 'Menu' button and press the "Prev" or "Next" button on the top of the radio till
3.
it shows 'Full Scan' and press "Select" button to run a full scan. The display will change to
'Searching...'. A progress bar will show the progress of the scan and the number of stations found
during the scan will also be displayed.
Prune Function
You can remove the DAB stations in the station list that cannot be received in your area. These are listed with a
'Prune?' prefix.
Press the 'Menu' button and use the "Prev" or "Next" button to scroll to 'Prune?'. Press "Select"
1.
button to select.
'Prune ?<No> Yes' is displayed. Use the "Prev" or "Next" button to scroll to 'Yes'. Press the 'Select'
2.
button to select and prune the station list. Stations with a 'Prune?' prefix will now no longer be
displayed. Press 'Menu' to turn back to DAB stations.
Storing a DAB station preset
Your radio can store up to 10 DAB stations in its preset memories for instant access to your favorite stations.
1.
Tune your radio to the station that you wish to preset.
Press and hold the 'Preset' button on the top of your radio. 'Preset Store <1: Empty>' is displayed.
2.
Use the "Prev" or "Next" button to move to preset location that you would like to store the radio
3.
station to (1-10).
Press and release the 'Select' button to confirm your selection. The display will confirm 'Preset X
4.
stored', where 'X' is the number of the preset (1-10).
Note: If there is already an existing DAB station stored under a preset, it will be overwritten when you store the
new station.
Tune to a DAB preset station
In DAB mode:
Fast press the 'Preset' button. 'Preset Recall <1: >' is displayed and the name or frequency of the
1.
station stored there, or 'Empty' if no Previous station has been stored.
Press the "Prev" or "Next" button to scroll to the Preset location and station that you would like to
2.
listen to (1 - 10).
Press the 'Select' button, the radio will instantly tune to that station and begin to play.
3.
Note: If no DAB station has been stored under the preset button, 'Preset Empty' will be displayed, then the radio
will revert to the Previously selected radio station after a few seconds.
DAB RADIO
3
DAB450 / English Instruction Manual