Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Change radio mode
When the radio is power on, press the "MODE" button to select the mode between DAB and FM.
DAB station scan
The first time you power on the radio, it will scan the DAB radio stations automatically. It will
display and play the first station after the scan is done.
If "No service" appears in the display, start the automatic station search again.
1. Press and hold the "INFO/MENU" button until the main menu is shown.
2. Choose with "
3. The station search starts. The display shows the number of stations found and the first found
radio station can be heard.
Tune DAB station
Press the "
" or "
FM scan
Change to FM mode by pressing the "MODE" button. Press and hold the "
the unit will start the scan. It will scan to the next available station.
To manual scan, use the "
100kHz.
Store preset station
1. Press and hold the "PRE" button until the display show "Preset store".
2. Choose the number of preset with "
3. Then press the "ENTER" button. The display show "Preset X stored" (X = Station number).
Note: You can also store the selected station directly on the station by pressing the station
buttons 1, 2 and 3. Press and hold the corresponding preset button until "Preset X Saved" (X =
Memory).
Recall preset station
1. To recall the preset station, press the "PRE" button shortly.
2. Use the "
" or "
3. At least press "ENTER" button to confirm. The selected radio station will be played.
Information (Info)
When the radio station is playing, press the "INFO/MENU" button repeatedly to cycle through the
information broadcasted by the radio as follow:
Under DAB
• DLS (Dynamic Label Segmenting): Radio text broadcasted from DAB station such as the
news, songs being played, etc)
• Signal strength: Shows the strength of the radio station.
• Channel/Frequency: The frequency of DAB-Station is displayed such as
"11C 220.352MHz".
• PTY (Programme Type): shows which type of program are you listening (Music, Talk,
News etc). If there are no information, it will display "Programme Type".

RADIO MODE

/
" the function "Full Scan" and press "ENTER".
" button to choose other radio channels and press "ENTER"
" or "
" button. And it will fine tune the frequency in a step of
" button to navigate.
" or "
" where you want to save the station.
2
DAB160 / English Instruction Manual
" or "
" button and

Publicité

Table des Matières
loading

Table des Matières