QUICK START GUIDE
Basics - Usage
Understanding the Pulsar Plus Status Colors
When powered on, you can check the status of your Pulsar Plus charger quickly and easily by the color of the LED
halo on the front of the charger and from the colors displayed in the myWallbox app when your charger is selected:
Green
Light blue
No EV is
Waiting for the EV to
connected to
start charging or the
the charger.
car is fully charged.
Charger is
Note, it can take
ready to use.
several seconds in
waiting mode before
charging starts.
Note: The current status colors will also be visible on the charger screen in
your myWallbox app.
No EV is connected to
EV is connected to the
the charger. Charger
charger. Charger is
is ready to use.
connecting.
Adjust the charging current
There are two ways to manage the charging current of your charger:
1.
During hardwire installation, your installer will have set the physical current selector switch inside the charger
to the appropriate amperage suitable for the connected circuit. This is to ensure that neither the charger nor
your vehicle draws more than 80% of the connected circuit's maximum rating (per the National Electrical Code).
2.
Using the myWallbox app.
Circuit Breaker
Amps
16A
20A
24A
32A
40A
48A
Light blue
Dark blue
(pulsing)
(pulsing)
Charging is in
Scheduled charge. A
process.
schedule has been
set by the user.
Charger is connected.
When would I adjust the amperage?
Rating
Shared circuit.
20A
circuit with other appliances, you may want to temporarily
25A
reduce the amperage available to charge your vehicle
30A
40A
when operating those other appliances to ensure you do
50A
not overload the circuit.
60A
Yellow
Red
An error has
The charger is
locked and will not
been detected
charge.
on the EV, grid or
the charger. See
"Troubleshooting".
Charging is in
Disconnected.
progress.
If your charger shares a high voltage
EN
6