Delay Start Button; Digital Display; Function Buttons; Setting Mode - FAVORIT 50873 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6
Control panel
Programme in progress
Multitab
1)
Salt
1)
Rinse aid
1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a washing
programme operates.

Delay start button

Use the delay start button to delay the start of the washing programme with an interval
between 1 and 19 hours. Refer to the chapter 'Setting and starting a washing programme'.

Digital display

The display shows:
• the set level of the water softener.
• Remaining time to the end of the programme.
• Activation/deactivation of the rinse aid dispenser (only with multitab function on).
• End of the washing programme. The display shows a zero.
• Number of hours in delay start.
• Fault codes.

Function buttons

Use the function buttons for these operations:
• To set the water softener. Refer to the chapter 'Setting the water softener'.
• To cancel the washing programme in progress or a delay start in progress. Refer to the
chapter 'Setting and starting a washing programme'.
• To activate/deactivate the multitab function. Refer to the chapter 'Multitab function'.
• To deactivate/activate the rinse aid dispenser, when multitab function is active. Refer to
the chapter 'Multitab function'.

Setting mode

The appliance must be in setting mode for these operations:
• To set a washing programme.
• To set the water softener level.
• To deactivate/activate the rinse aid dispenser.
Indicator lights
The indicator light comes on when you select a
washing programme.
The indicator light shows the activation/deacti-
vation of the multitab function. Refer to 'Mul-
titab function'.
The indicator light comes on when it is necessary
to fill the salt container. Refer to 'Use of dish-
washer salt'.
After you fill the container, the salt indicator
light can continue to stay on for some hours.
This does not have an unwanted effect on the
operation of the appliance.
The indicator light comes on when it is necessary
to fill the rinse aid. Refer to 'Use of rinse aid'.

Publicité

Chapitres

Table des Matières
loading

Table des Matières