Mi-T-M Corporation HDC Serie Manuel De L'opérateur page 6

READ ALL SAFETY WARNINGS BEFORE USING PRESSURE WASHER
HAZARD
RISK OF INJECTION
OR
SEVERE CUTTING INJURY
RISK OF
ELECTROCUTION
OR ELECTRICAL SHOCK
6
IMPORTANT SAFETY INSTRUCTIONS
POTENTIAL CONSEQUENCE
Serious injury or death could occur
from high pressure spray penetrating
the skin.
Serious injury or death may occur
from contact with electricity.
PREVENTION
Keep clear of nozzle and spray! Never put
your hand, fingers or body directly over the
spray nozzle.
Never point the high pressure discharge
spray at yourself or anyone else. This
equipment is to be used only by trained
operators.
Always keep operating area clear of all
persons.
Do not allow children to operate this unit.
Seek emergency medical care if the spray
appears to have penetrated the skin! Do not
treat as a simple cut!!
High pressure hoses and fuel lines should be
inspected daily for signs of wear. If evidence
of failure exists, promptly replace all suspect
hoses and fuel lines to prevent the possibility
of injury from the high pressure spray. If a
hose or fitting is leaking, Never place your
hand directly on the leak
Never operate the gun with the trigger wired
in the open position. To prevent accidental
discharge, the trigger gun should be securely
locked when not in use.
Before removing the spray nozzle or
servicing the unit, always shut off the unit and
trigger the gun to release trapped pressure.
(Even after you shut off the unit, there is
high pressure water left in the pump, hose
and gun until you release it by triggering
the gun.)
Do not direct spray on or into electrical
installations of any kind!
electrical outlets, light bulbs, fuse boxes,
transformers, the unit itself, etc.
Do not allow metal components of the
pressure washer to come in contact with live
electrical components.
HDC-SERIES Operator's Manual
This includes