Sorting Operations - PRO Intellect Technology CS-80E Manuel D'utilisation

Compteuse de pièces de monnaie
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

All manuals and user guides at all-guides.com
7

Sorting Operations

7.1 Coin Sorting
- Make sure that the display shows the value of counted coins as:
If any other amount is shown, press the «CLR» button to clear the current amount.
- Put EURO coins of one denomination or different denominations into the hopper
- Press the «START/STOP» button to start counting
- During the counting process, the coins will be delivered to the receiving slots in accordance
with their denomination. On the display will show the total value of counted coins.
ATTENTION! During counting or operation of the motor, please do not remove the receiving
slots.
- When the device finishes counting, the motor will stop and on the display will show the total
value of coins by all denominations:
- Press the «RPT» button to view how many coins are in each receiving slot. The figure on
the left shows the denomination of the coins, and the figure on the right shows the individual
number of this of coins in the receiving slot:
In order to view how many coins are in the other receiving slots, press the «RPT» button
several times as needed to view the result. Press «START/STOP» button to view the total
amount again.
ATTENTION! If the device automatically stops during counting, please see Table 7.2.
After counting, make sure that there are no coins in the hopper. If there are any coins left in
the hopper, please press the «START/STOP» button and finish counting.
When finished counting, please remove all of the coins in the receiving slots and clear the
result on the display (after removing all the coins).
ATTENTION! Automatically stopping counting (see Table 7.2) or removing the coins from the
receiving slots DOES NOT AFFECT the total amount of counted coins.
7.2 Automatically Stop Counting
ATTENTION! Each receiving slot has a limited capacity. When one of the receiving slots is
full, the device will automatically stop counting. If the receiving slot is full, the motor stops and
the display will show the current results. On the left side is the denomination and on the right
side is the total amount of coins for that denomination which have passed through this
receiving slot. Please see the limited capacity of each receiving slot as below:
7

Publicité

Table des Matières
loading

Produits Connexes pour PRO Intellect Technology CS-80E

Table des Matières