Publicité
User Manual
Introduction
Thank you for purchasing the LINDY Wireless Charger for Qi devices. Fully compatible with the Qi
wireless charging standard the Wireless Charger is designed to be used with the latest Smartphones,
Tablets, and smart watches fitted with a LINDY Wireless Charging Adapter or those featuring integrated
Qi Wireless charging. Using induction charging technology allows your device to be charged more
conveniently as the need to endlessly connect and disconnect cables is removed; simply place your
device on top of the pad to begin charging.
For more information about LINDY Wireless Charging Adapters please visit www.lindy.com
Package Contents
Wireless Charger
USB Cable Type A to Micro-B, 1m
This manual
Specification
Compatible with Qi Wireless Charging enabled devices
Maximum Power Output: 5VDC 1A*
Status LEDs
Dimensions: 70 x 70 x 18mm
*Charging rate/Current is determined by the Smartphone, Tablet, Watch or Wireless Charging Adapter.
Installation
Operation
The following steps describe the connection and operation of the Wireless Charger.
1. Connect the Wireless Charger using the supplied USB cable to a power supply.
2. Place your Qi Wireless Charging enabled device on to the top of the unit.
Note: It is recommended that the battery of your device is positioned to the centre of the charging pad to
provide the best charging performance. This can vary by device as each one uses a slightly different
location for the wireless charging coil.
3. The Status LED will change from Orange to Blue. If the status LED does not change then please
reposition your device.
4. When the Status LED changes back to Orange the device is fully charged.
All manuals and user guides at all-guides.com
English
Publicité
