Dynex DX-CDRW52 Guide De L'utilisateur page 7

All manuals and user guides at all-guides.com
DX-CDRW52.fm Page 7 Friday, April 1, 2005 4:16 PM
Features
• Make sure that your Secondary IDE cable has two ports available for two
IDE devices. If not, ask your system board manufacturer or purchase one
from a computer hardware store.
• If the original CD drive was installed in the Primary IDE channel, discon-
nect it from the Primary IDE cable.
• Adjust the Device Configuration jumper of the original CD drive to the
Master
• Adjust the Device Configuration jumper of the CD-R/RW drive to the
(SL) position.
Slave
SLAVE
USE CSEL
(MA) position.
Do not use the USE
CSEL setting
7
MASTER