Temperature Indicator - Oceanic OCEARTT121S Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1

1.1. Temperature indicator

In order to help you better set your
refrigerator, we have equipped it
with a temperature indicator
located in the coldest area.
To better store the food in your
refrigerator, especially in the
coldest area, make sure the
message "OK" appears on the
temperature indicator. If « OK » does not
appear, this means temperature has not
been set properly
It may be difficult to see the indicator,
make sure it is properly lit.Each time the
temperature setting device is changed,
wait for the stabilisation of the temperature
inside the appliance before proceeding,
if necessary, with a new temperature
setting. Please change the position of the
temperature setting device progressively
and wait at least 12 hours before starting a
new check and potential change.
NOTE: Following repeated openings
(or prolonged opening) of the door or
after putting fresh food into the appliance, it
is normal for the indication "OK" not to
appear in the temperature setting indicator.
If there is an abnormal build up of ice
crystals of ice crystals (bottom wall of the
appliance) on the refrigerator compartment,
evaporator (overloaded appliance, high
room temperature, frequent door openings),
put the temperature setting device on a
lower position until compressor off periods
are obtained again.
Store food in the coldest area of the
refrigerator.
OK
The following symbol indicates the coldest
area of your refrigerator.
To be sure to have a low temperature in this
area, make sure the
shelf is located at
the level of this
symbol, as shown in
the illustration.
The upper limit of
the coldest area
is indicated by the
lower side of the
sticker (head of the arrow). The coldest
area upper shelf must be at the same level
with the arrow head. The coldest area is
below this level.
As these shelves are removable, make
sure they are always at the same level with
these zone limits described on the stickers,
in order to guarantee temperatures in this
area.
Your foods will be better stored
if you put them in the most
appropriate cooling area. The
coldest area is just above the
crisper.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Oceartt121w

Table des Matières