Usb Charging Port - Fenton SBS20B Manuel D'instructions

Programming a Loaded Disc
•
Press the Stop button to stop the playback.
•
Press the Program button. Press the Skip/Search buttons to select a track from the loaded disc.
•
Press the Program button to add the selected track to the program.
•
Repeat the above steps to add up to 20 tracks to the playlist.
•
Press the Stop button to cancel a program.
BT CONNECTION
•
Press the CD/BT button repeatedly to switch to BT mode - then press the Pair button so the unit will enter pairing
mode.
•
Using the native controls on your BT device, select the "SBS20" in your BT settings to pair with.
•
If your device requests a password, enter the default password " 0 0 0 0 ".
•
When successfully paired and connected, the pairing indicator will display a solid blue light.
•
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device.
•
If your device should become unpaired or above steps or press the Pair button to start the pairing process pairing
again.
•
Use the native controls on the connected BT Device to select a track.
To play, pause or skip the selected track, use the native controls on the connected BT Device or press the Play/Pause or
Tun/Skip/Search buttons.

USB CHARGING PORT

Use the appropriate USB charging cable (not included), connect one end to the device and the other to the USB Charging Port
on the unit. Make sure the unit is plugged into the wall outlet.
TALK OVER
When you will talk or sing over the music , you would certainly want to attenuate the music. The SBS karaoke speaker does
this for you automatically. The sensitivity can be control by the Talk Over control.
5