Publicité
Liens rapides
Model/Modelo/Modéle
T2797 & T4797
Series/Series/Seria
Cassidy
TM
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:
For easy installation of your Delta
faucet you will need:
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and
maintenance information.
• To complete the deck and valve rough-in prior to
installing this trim kit.
Para instalación fácil de su llave
Delta
usted necesitará:
®
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
• Para completar el borde y la instalación de vál-
vulas dentro de las paredes previa a la
instalación de la llave y sus accesorios.
Pour installer votre robinet Delta
facilement, vous devez:
• LIRE TOUTES les instructions avant de déb-
uter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
• Installez le corps du robinet et terminez le
pourtour du bain avant de poser les accessories
de finition.
www.deltafaucet.com
86649
®
3/32"
(2.38mm)
?
®
86649
1
TWO HANDLE ROMAN TUB TRIM
LLAVE Y SUS ACCESORIOS PARA BAÑERA
ROMANA DE DOS MANIJAS (MANERALES)
ACCESSOIRES DE FINITION DE ROBINET
À DEUX POIGNÉES POUR BAIN ROMAIN
T2797
T4797
1/8" (3.17mm)
8/25/14
Rev. A
Publicité
Manuels Connexes pour Delta Cassidy T2797
Sommaire des Matières pour Delta Cassidy T2797
- Page 1 Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: For easy installation of your Delta ® faucet you will need: 1/8" (3.17mm) • To READ ALL the instructions completely...
-
Page 2: Cleaning And Care
January 1, 1995 and installed in the United States of America, Canada and Mexico. use and service. If repair or replacement is not practical, Delta Faucet Company may elect to DELTA FAUCET COMPANY SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR refund the purchase price in exchange for the return of the product. - Page 3 ▲ Specify Finish Model / Modelo / Modèle T2797 Model / Modelo / Modèle T4797 Especifíque el Acabado Précisez le Fini ▲ Specify Finish Especifíque el Acabado Précisez le Fini RP72719▲ Lift Rod RP72720▲ Barra de alzar Handle Button (2) Tige de Manoeuvre & Set Screw (2) Botón de la manija (2) RP73284▲ y Tornillo de Ajuste (2) Set Screw & Button RP72724▲...
-
Page 4: Entretien
T4797 RP40668 Diverter Assembly Ensamble del Desviador Dérivation Maintenance Model T4797 If faucet does not divert water from the spout to the hand shower, check that If faucet leaks from spout outlet: Shut off water supplies – the lift rod (1) is securely threaded into the diverter (2). If the problem per- Replace Seats and Springs (1). * sists remove the lift rod and spout. Replace the diverter assembly RP40668. If leak persists: Shut off water supplies – Replace Stem Unit Assembly (2). * *Install stems (2) correctly for proper han dle rotation: •... - Page 5 T2797 T2797 T4797 T4797 3/32" (2.38 mm) NOTE: The deck and valve rough-in must be finished before Place bases (1) with gaskets (2) over end valves (3). OPTION: Use installing the trim kit. silicone under the gasket if deck is uneven. Install gasket (4) and spout (5) on the spout adapter (6). Be sure spout is resting firmly on Model T2797 the deck. Install set screw (7) and tighten to secure the spout (5). Insert Unscrew the test cap (1) and discard. button (8) into set screw hole.
- Page 6 T4797 T4797 T4797 T4797 Remove conical nut (1) from handshower nest (2) and insert braid- For Model T4797 Only ed metal hose through the handshower nest. Reassemble test cap (3) to braided hose to hold hose in place. Place handshower nest Install lift rod (1). Screw the lift rod until it drops down and (2) on mounting piece (4). align in selected direction and tighten by rotates freely.
- Page 7 T2797 T4797 Install handles and secure with set screw (1). Be sure glide ring (2) is Model T2797 properly seated in bottom of handles before installing. Turn faucet handles (1) all the way on. Turn on hot and cold water supplies Push in button cover (3) to conceal set screw (1).
- Page 8 T4797 T4797 For Model T4797 Only Attach hand piece (1) to hose (2) with gasket (3) between connection. Refer to maintenance section (page 4) for correct Pull hose (1) to its farthest extension and point it down into the diverter and lift rod function. tub. Pull the lift rod (2) up to the full on position and flush water lines for one minute. After flushing turn off water at the bath valve handles. Return the lift rod to the down position. Sólo para los Modelos T4797 Conecte la pieza de mano (1) a la manguera (2) con el empaque Hale la manguera (1) a lo máximo que se pueda extender y...