Weka 533.2020 Instructions De Montage, D'utilisation Et D'entretien page 15

Tools
You will require the following tools prior to commencing installation.
Spirit level tape measure pencil
slitting saw /
Manual circular saw
Abbreviations/symbols:
FW -
cm -
mm -
approx. -
Fig. -
-
-
We hope your installation is successful and wish you many happy hours enjoying your weka product.
hammer burring iron
Front wall
centimetres
millimetres
approximately
Figure
not included in the delivery.
Wall boards marked with
an assembly aid, and are subsequently removed and installed elsewhere.
drill electric screwdriver
plane /
electric plane
are only temporarily attached as
rubber hammer
square Allen key
- Installation variants
- Inlet opening
- Outlet opening
universal cutter