Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Explanation of Setup Panel Items
■
Touch panel calibration
Correction is performed to align the touch position.
Click "Calibrate" from the UPDD console screen.
Sets the default settings of the touch position at setup.
The Calibration screen appears with cross marks on the display.
The fi rst cross mark appears at the upper left corner and the subsequent mark appears at each touch. Touch the
panel in order. Try to touch accurately as the calibration is performed according to the touched positions.
When fi nish touching, the "Confi rm" button appears. Touch the "Confi rm" button to exit calibration.
When the operation cannot be performed or to carry out calibration again, press the Esc key on your keyboard to
exit the Calibration screen.
• Calibration data after a calibration is stored in the Windows registry by the default setting.
Note:
• Touch panel shall be calibrated when the picture location or size is changed in the Pos./Size menu.
All manuals and user guides at all-guides.com
Touch Panel Setup
33
Publicité
Table des Matières
