BREVILLE RECOMMENDS SAFETY FIRST
We at Breville are very safety conscious and design and manufacture consumer products with
the safety of you, our valued customer, foremost in mind. In addition, we ask that you exercise
a degree of care when using any electrical appliance and adhere to the following instructions.
IMPORTANT
SAFEGUARDS
READ ALL INSTRUCTIONS
Carefully read all instructions before
operation and save for future reference.
Remove and safely discard any
packaging material and promotional
labels before using the appliance for the
first time.
To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted to the power plug
of this appliance.
This appliance has been designed
specifically for the purpose of heating
and boiling drinking quality water only.
Under no circumstances should this
product be used to heat or boil any other
liquids or foodstuffs.
Do not place the kettle near the edge
of a bench or table during operation.
Ensure that the surface is level, clean
and free of water.
Do not place the kettle on or near a hot
gas burner, electric element or where it
could touch a heated oven.
Keep the kettle clear of walls, curtains
and other heat or steam sensitive
materials. Minimum 8 inch distance.
Do not operate the kettle on a sink drain
board.
Always ensure the kettle is properly
assembled before connecting to a
power outlet and operating. Follow the
instructions provided in this book.
4
The kettle must be used only with the
power base supplied.
The kettle is not intended to be operated
by means of an external timer or
separate remote control system.
Do not touch hot surfaces. Use the
handle for lifting and carrying the kettle.
Do not place anything on top of the lid.
Always ensure the START/CANCEL
button has been pressed to CANCEL,
then remove the power plug from the
power outlet before attempting to move
the appliance, when the appliance is not
in use and before cleaning and storing.
Use caution when pouring water from
the kettle, as boiling water and steam will
scald. Do not pour the water too quickly.
To protect against electric shock, do not
immerse the kettle base, power base,
power cord or power plug in water or
allow moisture to come in contact with
these parts.
Do not remove the kettle from the power
base during operation. Ensure the
kettle has switched off after the water
has boiled or reached the selected
temperature, before removing the kettle
from the power base. If the kettle is
removed from the power base during
the Hold Temp function, the kettle will
automatically switch off.
Do not move the appliance while it is
switched on.