Playing Back Music Via Bluetooth - AEG SR 4367 BT Mode D'emploi

All manuals and user guides at all-guides.com
English
48
3. You have two possibilities to look for and store radio
stations.
• Automatic station scan:
Important! Any previously stored radio stations will
be overwritten.
Press and hold the SCAN/ button (4) for approx. 3
seconds. The device is searching the complete FM
frequency band for radio stations. The stations found
are stored ascending by frequency.
• Searching for radio stations manually:
Briefl y press the or
found the desired radio station. Press and hold one
of the two buttons to search for the next or previous
radio station respectively.
Storing stations:
1. Use the or button to search for the desired
radio station.
2. In order to store the radio station, press the
MEM/CLK-ADJ button (16). "01" and "MEM" will
be fl ashing in the display.
3. Use the FOLDER/PRE-UP button (8) or FOLDER/
PRESET / buttons (13 on the remote control)
to select the desired memory position.
4. Press the MEM/CLK-ADJ button. The radio
station will be stored.
NOTE:
If there is noise from the station received, we recommend
that you switch to MONO. Press the ST/MO/
to select MONO or STEREO. When in stereo mode, the
display will show " ".
Selecting stored radio stations
Select preset radio stations as follows:
• Press the FOLDER/PRE-UP button on the device repeat-
edly.
• Press the FOLDER/PRESET / buttons on the remote
control.

Playing back music via Bluetooth

Bluetooth involves a technology for wireless radio connec-
tion of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (Industrial, Scientifi c and Medical). Interference
can be caused for example by WLAN-networks, DAB radios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth-en-
abled device. The functional radius is limited to approx. 15
metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profi le (Advanced
Audio Distribution Profi le) and has a music-player function,
button (2) until you have
button (5)
then you can also wirelessly transfer music to the device. The
A2DP profi le involves a multi-vendor Bluetooth profi le. By
streaming, stereo-audio signals are wirelessly transferred be-
tween the playing device (source) and the receiving device.
To be able to remotely control the source, the playback de-
vice must support the AVRCP profi le (Audio Video Remote
Control Profi le).
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in your
player (e.g. mobile phone). For this, refer to the operation
manual of your player.
2. Select the BT mode using the FUNC button (1). The
control lamp will blink blue. "PAIRING" will be fl ashing
in the display. This signalizes that the device is in pairing
mode.
3. Choose the Bluetooth menu in your player and register
the device in your player. For this, refer to the operation
manual of your player. The device "AEG SR4367BT" will
show in your player as a selection.
NOTE:
• Only one playback device can be connected with
the device at one time. If the device is already con-
nected with another playback device, the device
will not appear in the BT selection menu.
• To disconnect an existing Bluetooth connection,
keep the ST/MO/
The control lamp fl ashes blue. "PAIRING" will be
fl ashing in the display.
4. Now enter the password "0000" in your player, depend-
ing on the device manufacturers, model, and software
version.
After successful pairing, the control lamp lights up blue and
BT appears in the display. For the further procedure, please
refer to the user manual of the playback unit. If possible,
adjust the volume of the external unit to a comfortable level.
NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect the
devices.
• In case of problems with the registration of a replay
device, deactivate the WiFi-/and mobile data function
in your playback device.
• The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in the
future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
button (5) pressed down.