MSW Motor Technics MSW-POL560C Manuel D'utilisation page 6

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
TECHNICAL DATA
Product name
Model
MSW-POL560C
Rated voltage [V]/Frequency [Hz]
Rated power [W]
560
Rotation speed [rpm]
1800-6800
Sound power level L
dB(A)
84
wA
Sound pressure level L
dB(A)
95
pA
Vibration emission value a
h
Weight [kg]
3,0
SCOPE OF APPLICATION
The car polisher is designed for polishing painted metal surfaces and all other polishing works, particularly
in the automotive industry.
Do not use the car polisher to wash vehicles using detergents – there is a risk of a fatal electric shock.
The user is liable for any damage resulting from non-intended use of the device.
BEFORE THE FIRST USE
Upon receipt of the goods, check the packaging for integrity and open it. If the packaging is damaged, please
contact your transport company and distributor within 3 days, and document the damages as detailed as
possible. Do not turn the package upside down! When transporting the package, please ensure that it is kept
horizontal and stable.
DISPOSAL OF THE PACKAGING
Please keep all packaging materials (cardboard, plastic tapes and Styrofoam), so that in case of a problem, the
device can be sent back to the service centre in accurate condition!
INSTALLING THE APPLIANCE
APPLIANCE LOCATION
Keep the device away from hot surfaces. The device should always be used out of reach of the children and
the mentally ill. Ensure unobstructed access to the electricity plug at all times. Make sure the power source
reflects the parameters on the rating plate!
OVERVIEW
MSW-POL560C
1
2
4
3
10
Car Polisher
MSW-POL120C
MSW-POL60C
230~ / 50
120
60
3500
3500
60,1
60,1
71,1
71,1
9,619 m/s
2,
-
Uncertainty K=1,5 m/s
2,2
1,5
1.
ON/OFF switch
2.
rotational speed adjustment
3.
disk
4.
additional handle
Rev. 16.06.2020
MSW-POL120C
1
2
PRINCIPLES OF OPERATION
Before the first use
Make sure the power supply voltage matches that on the device rating plate.
Before connecting the machine to a power source, make sure the ON/OFF switch is in the OFF
position. If the switch is in the ON position, connecting the machine to a power supply will activate it,
which might cause an accident!
Check the state of the power cable and plug. If the power cable needs replacing, seek the services of
a qualified technician.
Switching on and off
To start using the device, press/slide the ON/OFF switch. If using the MSW-POL560C model, before starting,
set the switch to the slowest speed – then adjust the speed once the device starts.
Do not use the device while standing on a ladder. Both hands have to be free in order to use the device.
If the device is to be operated whilst working at heights, make sure an appropriative, stable platform or
scaffolding with bannisters and security supports is used. Disconnect from power source before commencing
maintenance, lubrication, adjusting and replacing accessories (e.g. polishing disks) and when the device is not
in use.
Always make sure the polishing disk is not contaminated with abrasive elements - this might scratch the
polished surface. Polishing substances, such as wax, paste or liquid should be applied to the polishing disk
and not on the polished surface. Start the car polisher only once the disk comes into contact with the
surface to be polished. Grip the car polisher firmly before starting it. Make sure the surface to be polished is
free from sharp edges or projections which might damage or break the polishing disk. Polishing disks should
be washed regularly or when required. Abrasive substances may adhere to a polishing disk saturated with
wax and scratch the polished surface.
Wash the surface before polishing. For best polishing results, make sure that the surface is clean - this also
reduces the risk of grime and small mechanical contaminants scratching the surface.
To start polishing, place the car polisher onto the surface to be polished and switch it on. Do not press the
car polisher into the polished surface - use circular movements without increasing pressure.
MSW-POL120C and MSW-POL60C models include two types of polishing bonnets: coarse and soft. The
coarse polishing bonnet is used to distribute the polishing substance and the soft polishing bonnet is for
polishing. Make sure that the polishing bonnet is aligned evenly on the disk.
Rev. 16.06.2020
The polishing sponge is attached to the disk using Velcros. To replace
the disk, disconnect the device from the power source, insert
spanner (included) between the disk and the device (preventing the
disk from rotating) and unscrew the disk by hand.
MSW-POL60C
1
2
1.
ON/OFF switch
3
2.
handles
2
3.
polishing disk
1.
ON/OFF switch
2.
polishing disk
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Msw-pol120cMsw-pol60c

Table des Matières