Description (Fig. A); Initial Use - Princess 203040 Mode D'emploi

Congratulations!
You have purchased a Princess product.
Our aim is to provide quality products with
a tasteful design and at an affordable price.
We hope that you will enjoy this product for
many years.

Description (fig. A)

Your 203040 Princess juice extractor has been
designed for extracting juice from fruits and
vegetables. The appliance is suitable for indoor
use only. The appliance is suitable for domestic
use only.
1. Power indicator
2. Speed control knob
3. Lock handle
4. Juice collector
5. Juice outlet
6. Juice filter
7. Pulp jug
8. Lid (juice extractor)
9. Feeding tube
10. Pusher
11. Juice jug
12. Lid (juice jug)

Initial use

•
Clean the appliance. Refer to the section
"Cleaning and maintenance".
• Clean the accessories. Refer to the section
"Cleaning and maintenance".
Assembly (fig. A)
Before you proceed, we need you to pay
attention to the following notes:
- Before assembly or disassembly, switch off
the appliance, remove the mains plug from
the wall socket and wait until the appliance
has cooled down.
• Place the appliance on a stable and flat
surface.
•
Lower the lock handle (3).
• Place the juice collector (4) into the
appliance.
•
Place the juice filter (6) into the juice
collector (4).
• Place the pulp jug (7) into the appliance:
- Tilt the pulp jug slightly forward.
- First insert the top end, subsequently the
bottom end of the pulp jug.
•
Place the lid (8) onto the appliance.
• Raise the lock handle (3). Make sure that
the lock handle (3) is locked into position
on both sides of the lid (8).
Use (fig. A & B)
Before you proceed, we need you to pay
attention to the following notes:
- Do not leave the appliance switched on
continuously for more than 10 minutes.
After 10 minutes, switch off the appliance
and allow it to cool down for 5 minutes
before switching it on again.
- When processing hard fruits or vegetables,
do not leave the appliance switched on
continuously for more than 45 seconds.
After 45 seconds, switch off the appliance
and allow it to cool down for 30 seconds
before switching it on again.
- If the appliance stops working, possibly
caused by the thermal protection system,
switch off the appliance and allow it to cool
down for 20-30 minutes before switching it
on again.
- Do not insert your hands into the feeding
tube to press fruits and vegetables. Always
use the pusher. Do not exert pressure on
the pusher.
- If the appliance starts to vibrate strongly and
produce less juice, switch off the appliance
and subsequently clean the juice filter.
Before you proceed, we would like you to
focus your attention on the following notes:
- Only operate the appliance when the pulp jug
is placed under the pulp outlet. Regularly
empty the pulp jug when processing larger
quantities of fruit or vegetables. Empty the
pulp jug when it is full.
- Only operate the appliance when a juice jug
is placed under the juice outlet. Regularly
empty the juice jug when processing larger
quantities of fruit or vegetables. Empty the
juice jug when it is full.
- Do not exceed the maximum mark of the
juice jug. The maximum capacity of the
juice jug is 1000 ml.
8