UK
Attach the Door Handle
Once the positioning of the door has been decided, attach the
door handle.
Remove the two screw covers from the outer edge of the
1.
door.
Remove the screw cap from the handle support and screw
2.
into place.
Slot the handle bar onto the lower handle support.
3.
Slot the upper handle support onto the handle bar and
4.
screw into place.
Place the screw caps over the screws.
5.
Operation
Control panel
Up/Down buttons
Recommended Set Temperatures
Wine
Red
White
Sparkling White
Rose
Note: These temperatures are an estimate and may need to be higher/lower depending
on the operational environment of the wine cooler.
3
All manuals and user guides at all-guides.com
Temperature LED's
Temperature
16-18°C (60-65°F)
10-15°C (50-59°F)
7-9°C (45-49°F)
9-10°C (49-51°F)
Fahrenheit/Centigrade
LED's
Fahrenheit/Centigrade
Lit LED
Red
Green
Amber
-
Light button
button