All manuals and user guides at all-guides.com
BELT CLIP
Mounting instructions
After cleaning all surfaces using a cloth
moistened with alcohol,
1• Remove the adhesive protection and
place it on the rear tab.
+
-
2• Position the tab on the mark on the
rear of the mobile above the loudspeaker
holes. Press firmly.
Leave the tab on the mobile for
72 hours before use.
Instructions for use
The clip is used to attach the mobile to
your belt.
1• Slide the tab into the clip to attach the
mobile.
Caution: the mobile must not be wedged
against your chair when you are seated.
2• To remove the mobile, press the
upper part of the clip and slide the mobile
upwards.
PAGE 36