MTD Yard Machines Snow Fox Manuel De L'utilisateur page 10

Discharge Direction Adjustment
Snow may be discharged to the left, straight forward, or
to the right of the operator.
To change the direction, use the following instructions:
1. Release the bail to stop the rotor.
2. Firmly grasp the discharge directional control handle
and pull it up. This releases the spring-loaded rod
from the discharge direction slot and allows free
movement (Fig. 6)
3. Turn the discharge directional control to the left, the
center or the right, depending on which direction you
want to throw the snow (Fig. 7).
NOTE: From the center position, the discharge directional
control turns approximately 45 degrees in either
direction (left or right). Do not force it.
4. Release the discharge directional control so it fits
into the slot to secure the desired position.
NOTE: Make sure the discharge directional control is
securely positioned in direction slot and cannot
rotate freely.
5. Restart the unit according to the Starting Instructions.
10
OPERATING INSTRUCTIONS
Pull the Discharge
Directional Control
Upwards
Fig. 6
Top View
45°
Discharge snow to
LEFT of operator
Tips for Best Snow Throwing Results
• For the most efficient snow throwing, keep the vanes
parallel and throw snow downwind.
• Slightly overlap each swath you make (Fig. 8).
Discharge snow
in FRONT
45°
Discharge snow to
RIGHT of operator
Fig. 7
Fig. 8