Product Description And Controls; Getting Started; Use And Operation - Klarstein Suppenmixer Mode D'emploi

Product Description and Controls

1 Measure cup
2 Lid
3 Base
4 Smooth button
5 Chunky button
6 Heat button
7 ON/OFF
8 LCD Display
9 Knob
10 Jug
11 Handle
• Open the large box.Remove all packing materials and protective covering from the unit and parts.
Do not discard the wrapping until you have checked that the blender is working correctly.
• Remove the accessories and clean them with soapy water, To eliminate waste produced during
manufacturing.
This appliance is made for processing and cooking of foods and also for preparation of soups, Sauces,
purees, creams, etc.
Before starting to use the article, Make sure you cor-
rectly install the lid as follows. Insert the lid and turn
it clockwise until the end of the lid and handle fully
coincide.
The jug has a safety switch that should be pressed
by the lid to allow its operation when the lid and the
handle are fully aligned, If incorrectly installed, the
mixer will not start.
Operation
• Place the jug on the base of the device and connect the power cable to an electricity outlet of 220-
240V/50 Hz
• The indicator light of the ON/OFF button blinks. Press the ON/OFF button once and the mixer
passes to „stand-by ready to be used.
• To select a function ,press any button and immediately ON/OFF. the mixer will start to work ac-
cording to the pre-set parameters.
NOTE: the indicating light of ON/OFF button will be green when the device of working and red when
it is off . To cancel any function , press the ON/OFF button and red indicating will come on.
Lid and Measuring Cup
When you need to add the required food or ingredients, scale on measuring cup, can be used to
measure the volume you want. Steam will escape around the measuring cup when the Soup Maker
is in heat mode, this is normal.
7

Getting Started

Use and Operation