HomePro GHP10140T Guide De L'utilisateur page 12

All manuals and user guides at all-guides.com
Maintenance
(A) Maintenance Schedule
Before performing any maintenance, turn engine off and remove the wire from the spark plug to prevent
accidental starting and serious injury.
IMPORTANT: The warranty on this tiller does not cover items that have been subjected to operator
abuse or negligence. To receive full value from the warranty, the operator must maintain the tiller as
instructed in this manual, and only use genuine replacement parts. The following table lists required
periodic maintenance.
IMPORTANT NOTES about Maintenance schedule
1. Re-check tightness of all fasteners after first 2 hours of initial use.
2. Change engine oil after first 5-8 hours of initial use.
3. Change oil every 25 hours if operating under heavy load or in high temperatures
4. Clean air filter every 10 hours if operating under dusty conditions.
Use only GENUINE replacement parts. Other parts may damage the unit or result in injury.
(B) Servicing the Tiller
The following information will help you make the necessary checks and perform the procedures
required to follow the normal care recommendations made for your tiller unit. If you prefer, your local
authorized service provider can make these checks and perform the required procedures for you.