Carrier IGLOO 51AKP Manuel De L'utilisateur page 5

STAND-ALONE
Make sure the
flexible hose is
not kinked or
curved too
tightly and that
it is placed on
a supporting
surface
(windowsill,
floor...).
All manuals and user guides at all-guides.com
Preparation for:
cooling with dehumidification
Air flow
Install the flexible hose onto the air conditioner. To improve the air
conditioner performance make sure that:
Air flow
- the internal tips of the flexible hose are turned as shown in the picture;
- the hose is stretched as little as possible;
- the hose is not bent, folded or throttled.
Move the air conditioner close to the
window, stretching the hose as little as
possible (max. extension 2000 mm).
Hold the hose end in position with
the fastening strap and suction cup.
Ensure that the expulsion of hot air
from the pipe is free from obstructions.
E N G L I S H
To open the window as little as possible,
place the air outlet vent onto the flexible
hose and place them outside the window.
If required, the air conditioner can be
installed through a porthole in the
window or through a hole in the wall
follow the instructions in the manual
relating to this component.
(Accessory not included)
GB - 3