Appendix; Example Of Use; Troubleshootings; Using Multiple Touch Panels At A Ethernet - IRIS Net TPI-8 Mode D'emploi

3 Appendix

3.1 Example of use

3.2 Troubleshootings

Using multiple Touch Panels at a Ethernet

If more than one Touch Panel is present on the Ethernet network, a warning
message may be shown on the TPI-8/TPI-12 during the boot up procedure. In
this case an individual „computer name" must be assigned to each Touch Panel.
In the following it is assumed that the TPI-8/TPI-12 is activated and the IRIS-
Net-project is shown in fullscreen mode.
1. Connect the network connection of your PC to the Ethernet interface
of the TPI-8/TPI-12, either directly with a CAT-5 crossover cable, or
through a hub/switch.
2. On your PC click on Start > All Programs > Accessories > Command
Prompt.
The command prompt dialog will appear.
TPI-8 / TPI-12 Touch Panel
22
Owner's manual
All manuals and user guides at all-guides.com
TPI-8 TPI-8
TPI-12
Ethernet Switch
with IRIS-Net Software
+24V DC
Control PC