Maintenance & Care; Replacing The Lithium Battery - IRIS Net TPI-8 Mode D'emploi

2.4 Maintenance & Care
TPI-8 and TPI-12 need only minimum maintenance and care. In case of light
contamination clean the unit with a clean, dry rag. To remove persistent dirt, use
a mild cleaning agent and a clean, soft, slightly dampened cloth only.
NOTE:
Do not use any abrasives, abrasive sponges, steel wool or sol-
vents like alcohol, acetone or petroleum ether for cleaning the
touch screen surface.

Replacing the Lithium Battery

The System's main board houses a Lithium battery (CR-2032). If, in the touch
panel's BIOS, the time is reset to the default value (SUN 01.JAN.2006), the
Lithium battery needs to be replaced.
In doing so, please proceed as follows:
1. Disconnect the touch panel from the power supply.
2. Remove the CompactFlash Card.
3. Open the unit by removing the screws as shown in the following
illustration.
All manuals and user guides at all-guides.com
TPI-8 / TPI-12 Touch Panel
Owner's manual
19