Editing Of Screen Saver And Display Backlight Configuration - IRIS Net TPI-8 Mode D'emploi

9. Click on Send File ... button in the Update Mode dialog.
The window Open appears.
10. Select the file to be transfered in the window Open and click on the
Open button. The file types Project Files (*.ds) und Application
Archives (*.zip) can be selected.
The file is now sent to the TPI-8/TPI-12. The successfull transmission is
indicated by message „success" in the Update Mode dialog at the PC and
also the TPI-8/TPI-12.
11. Enter doc*update=reboot and tap the return button.
The TPI-8/TPI-12 reboots and uses the new IRIS-Net project file or IRIS-Net
application.
Editing of screen saver and display backlight configura-
tion
The purpose of this procedure is to edit the screen saver and display backlight
configuration of the TPI-8/TPI-12. In the following it is assumed that the TPI-8/
TPI-12 is activated and the IRIS-Net-project is shown in fullscreen mode.
1. Connect the network connection of your PC to the Ethernet interface
of the TPI-8/TPI-12 directly with a crossover cable, or with a patch
cable and a hub/switch.
2. Click on Start > All Programs > Accessories > Command Prompt.
The window command prompt appears.
All manuals and user guides at all-guides.com
TPI-8 / TPI-12 Touch Panel
Owner's manual
17