SEVERIN TO 2034 Mode D'emploi page 11

Masquer les pouces Voir aussi pour TO 2034:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
∙ No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
∙ This appliance is intended for domestic or
similar applications, such as
- in shops, offi ces and other similar
working environments,
- in agricultural working environments,
- by customers in hotels, motels etc. and
similar establishments,
- in bed-and breakfast type environments.
Temperature control
With the temperature control knob, the
temperature can be set to the desired level.
4-position switch settings
 No setting selected
Upper heat
Lower heat
Upper and lower heat
The heating elements will only come on once
the timer is activated.
Timer
The timer can be used for either selecting a
certain cooking time (up to 60 minutes).
To turn the unit off, turn the switch to position
0. To pre-programme the cooking time, turn
the switch clockwise to the desired time.
To set a time of less than 10 minutes, turn the
timer to a somewhat higher setting fi rst and
then slowly turn it back to the desired time
setting. After the pre-programmed time has
elapsed, an acoustic signal indicates that the
heating elements are switched off. To switch
off the entire appliance, the heating elements
must be switched off as well.
Indicator lamp
The indicator lamp lights up when the
All manuals and user guides at all-guides.com
appliance is switched on. It goes out once
the pre-programmed time has elapsed, or if
the switch is turned back to position 0.
Start up
∙ Clean the appliance (see General care
∙ Before using the appliance for the fi rst
Operation
∙ Before using the appliance, make sure
∙ Pre-heat the oven compartment for
∙ Place the food to be cooked on the grill
∙ Close the door, set the temperature
∙ For baking or grilling from above,
∙ The switch settings may be changed
∙ After the pre-programmed cooking time
and cleaning) and remove any packing
materials completely.
time, let it heat up for 15 minutes with
both heating elements on. When the
appliance is fi rst switched on, a slight
smell may be emitted. This is normal and
will only last for a very short time. Ensure
suffi cient ventilation.
that the crumb tray is fi tted in its proper
position underneath the lower heating
element.
several minutes with the door closed,
using both heating elements. Set the
temperature control knob to the required
level and use the timer control to select
the desired pre-heating time.
rack. When cooking food containing fat or
moisture, use the baking tray to stop any
drips into the interior of the appliance.
control to the required level and use the
timer knob to select the desired cooking
time.
either the upper or the upper and lower
elements may be selected.
during the cooking process.
11

Publicité

Table des Matières
loading

Table des Matières