OpERATING YOUR BREVILLE SMART OVEN™ — WARM
5.
The warming temperature and time can
be adjusted before or during the warming
cycle.
a) The warming temperature is displayed
as the top figure on the LCD screen.
Turn the TEMPERATURE dial to adjust
the warming temperature in 10°F
increments, from 120°F to a maximum
of 450°F (or in the Celsius mode, 5°C
increments, from 50°C to a maximum
230°C).
b) The warming time is displayed as the
bottom figure on the LCD screen.
Turn the TIME dial to adjust the baking
time in one minute increments up to
1 hour, and in 5 minute increments
between 1 and 2 hours
6.
Press the START/CANCEL button to
activate this setting. The button
surround will illuminate red, the oven
alert will sound and the LCD screen
will illuminate orange.
7.
The timer will be displayed and
begin to count down in one minute
increments. The temperature and time
can be adjusted during the warming
cycle by turning the corresponding
TEMPERATURE and TIME dial.
8.
At the end of the warming cycle, the
oven alert will sound three times. The
START/CANCEL button surround will no
longer illuminate red and LCD screen will
illuminate blue.
THE OUTER SURFACE OF THE
OVEN, INCLUDING THE OVEN
DOOR, IS HOT DURING AND
AFTER OpERATION. ALWAYS
USE pROTECTIVE HOT pADS
OR INSULATED OVEN MITTS
WHEN INSERTING, REMOVING
OR HANDLING ITEMS FROM
THE OVEN.
40
9.
The warming cycle can be stopped
at any time by pressing the START/
CANCEL button. This will cancel the
cycle. The button surround illumination
will go out and the LCD screen will
illuminate blue.