Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OpERATING YOUR BREVILLE SMART OVEN™ — ROAST

ROAST FUNCTION

Elements
Top and bottom heating elements cycle on
and off to regulate the correct temperature.
The top middle element is off.
Rack position
Bottom rack height position.
Optional Settings
CONVECTION button.
TEMPERATURE CONVERSION button.
The ROAST function is ideal for cooking a
variety of meats and poultry that are tender
and juicy on the inside and roasted to
perfection on the outside.
1.
Insert the wire rack into the bottom rack
height position. The wire rack should
be positioned with the spokes facing
upwards.
2.
Close the oven door.
3.
Turn the FUNCTION dial until the
indicator on the LCD screen reaches the
ROAST function. The top figure on the
LCD screen indicates the preset ROAST
temperature of '350°F', while the bottom
figure on the LCD screen indicates the
preset time of '1:00 HRS'. The preset
CONVECTION setting will also be
displayed.
26
4.
The roasting temperature and time
can be adjusted before or during the
roasting cycle.
a) The roasting temperature is
displayed as the top figure on the
LCD screen. Turn the TEMPERATURE
dial to adjust the roasting temperature
in 10°F increments, from 120°F to a
maximum of 450°F (or in the Celsius
mode, 5°C increments, from 50°C to
a maximum 230°C).
b) The roasting time is displayed as the
bottom figure on the LCD screen.
Turn the TIME dial to adjust the
roasting time in one minute increments
up to 1 hour, and in 5 minute
increments between 1 and 2 hours.
NOTE:
Use the table below as a guide only
to estimate and plan cooking times.
We recommend checking doneness
with a reliable meat thermometer.
Type/Cut
Roasting time
per 1lb (500g)
Beef - Rib Eye, Round or
30 minutes
Rib Roast
Pork - Loin (bone in/out)
35 minutes
Lamb - Leg (bone in/out)
30 minutes
Chicken - Whole
30 minutes
NOTE:
We recommend limiting the weight
of meats and poultry to be roasted
to 4.5 lbs (2kg). However the
actual maximum weight will vary
depending on the type, cut, shape
and size of the meat.
OpERATING YOUR BREVILLE SMART OVEN™ — ROAST
NOTE:
Your customized ROAST temperature
and time settings will remain in the
memory of the oven until you change
them or unplug the oven from the
wall outlet. When the oven is plugged
back into the wall outlet, the ROAST
function will automatically return to
the preset temperature of '350°F',
preset time of '1:00 HRS' and preset
CONVECTION setting.
5.
Press the START/CANCEL button
to activate this setting. The button
surround will illuminate red, the oven
alert will sound and the LCD screen
will illuminate orange.
6.
The LCD screen will indicate a blinking
'PREHEATING'. Once the oven has
reached the set temperature, the
temperature alert will sound.
7.
Place food, positioned on the Breville
enamel baking pan or in an oven-proof
dish, on the center of the wire rack so air
flows around the sides of the food.
OUTER SURFACE OF THE
OVEN, INCLUDING THE OVEN
DOOR, IS HOT DURING AND
AFTER OpERATION. ALWAYS
USE pROTECTIVE HOT pADS
OR INSULATED OVEN MITTS
WHEN INSERTING, REMOVING
OR HANDLING ITEMS FROM
THE OVEN.
NOTE:
When roasting, the Breville enamel
broil rack may be inserted into Breville
enamel baking pan. When assembled
together, the broil rack is designed to
drain grease and fats away from meats
for healthier cooking. The baking pan
collects these pan drippings and helps
prevent spattering.
NOTE:
Citric acid, found in foods such a
orange, lemon and lime juice, may
damage the porcelain enamel finish
of the baking pan and broiling rack.
When cooking foods with high
citric acid content, we strongly
recommend lining the enamel
surfaces with foil or baking paper to
extend the life of these accessories.
NOTE:
Caution should be exercised
when using metal foil to cover
accessories, pans, and dishes.
Be sure that the metal foil is fitted
securely as close contact with the
oven's heating elements can cause
overheating and risk of fire.
NOTE:
When using metal foil to cover
accessories, pans, and dishes, it is
recommended that the wire rack be
in the middle or bottom location.
NOTE:
It may be necessary to lightly grease
or line the enamel baking pan with
baking paper or foil to prevent food
from sticking.
NOTE:
Caution should be exercised when
using pans and dishes constructed
of materials other than metal. If
using ceramic or glass pans or
dishes it is important that they are
oven safe to prevent cracking.
27

Publicité

Table des Matières
loading

Table des Matières