ELPRO ECOLOG TN2 Mode D'emploi page 20

6. Print- and Special- Functions
6.1 Alarm- and Status- Information
All dataloggers (except TN2) are printing a combined
alarm and status protocol.
6.2 Function F2 - Time Stamp
All dataloggers of the THx-Family will mark the actual
measurement value with a time stamp, as input D2, by
pressing F2.
Also this time stamp is visible under PC data evaluation
as D2 (graphics and table mode).
6.3 Function F3 - Short Protocol
All dataloggers except TN2 are able to printout measure-
ment values in a short protocol (up to 250 values).
TN3-P: Printing starts by power up of the printer. At the
time of data printing, MarkPos (b or B) marking in the
measurement value table.
6.4 Legend of Markings at the Line End
* = Alarm
a = Input D1
b = Input D2
c = Input D1 + D2
Seite - 20
Getting Started
ECOLOG
A = Alarm and Input D1
B = Alarm and Input D2
C = Alarm and Input D1 + D2
ECOLOG THx
ECOLOG TNx
D-EZ-6003Bh
11. 2016