BEC MORITZ 400-40 Mode D'emploi page 8

If you're connecting your subwoofer to an external crossover, please follow the steps below:
1. Connect the speakers L and R
to the OUT-L and OUT-R outputs
of the crossover. Use the
provided speaker cables for
connection.
Please pay attention to the
correct polarity (+ und -).
Note: Speakers, crossover and amplifier provide positive and negative connectors (+ and -). Therefore make
sure to connect all components with the correct polarity to each other (+ to + and - to -).
MORITZ 400-40 Subwoofer | Page 7
2. Connect the input LFE-IN of the
subwoofer to the SUBWOOFER
output of the crossover. Use the
provided RCA cable for
connection.
If technically possible use a stereo
RCA cable.
3. Connect the inputs INPUT-R
and INPUT-L of the crossover to
the speaker outputs of your AVR
or amplifier. Use the provided
speaker cables for connection.
Please pay attention to the
correct polarity (+ und -).