Installing the subwoofer spikes
The MORITZ 400-40 comes with a spike set that can be installed prior to use. Please follow the below
steps when unpacking and setting up the subwoofer. Due to the weight of the subwoofer we highly suggest
having a second person assist with this process.
1. Carefully unbox and remove the subwoofer from the box. Due to the weight of the subwoofer we suggest
using a second person. Place the subwoofer upside down on a soft non-abrasive surface.
2. Attach the spikes by screwing them into the threaded inserts on each of the four corners on the subwoofer.
3. If you are installing the subwoofer on carpet, carefully turn the subwoofer over and adjust for the spikes to
level the subwoofer.
4. If you are installing the subwoofer onto hardwood, tile or other non-carpet surfaces please use spike discs
or do not install the spike to prevent any damage to your floor.
MORITZ 400-40 Subwoofer | Page 5