Cleaning And Maintenance - Horeca Select GEG 2001 Mode D'emploi

b) Initial starting up :
Before the first use, it is important to remove, by using detergent, the anti-rust coating applied to the griddle in
the factory.
Connecting the equipment :
- Make sure that the voltage and frequency of the electrical system comply with the values indicated on
the nameplate.
- Always check that the electric power supply cable and plug are free of damage.
- Remove the flange to pay out the entire length of the cord and feed it through the square hole then close
it before inserting the plug into the socket.
- Connect the electric power supply cable to a socket with an earthed protection wire.
- The display is now connected.
NB: To connect the display to a socket without any earth protection wire, or to connect directly to the electrical
system, have a qualified electrician make the connection.
c) Use of the equipment :
Elements on the front board
Commutator
Thermostat
Green pilot light
Orange pilot light
Starting
1/ Switch on the On/Off switch.
2/ Turn the thermostat on the desired position.
3/ Once the orange thermostatic pilot light is switched off, the griddle plate is ready.
Stopping the equipment
- Turn the thermostat to 0
- Set the switches to 0: the appliance is turned off entirely
- Remove the electric power supply cable
- Let the appliance cool down.
- Clean the equipment. (cf. 6 Cleaning)
- Lay some grease on the plate
d) Failure / Repair :
In case of failure or if a part is damaged, please call your after sales service and have qualified personnel deal
with any technical operations.
VI. CLEANING AND MAINTENANCE
- Remove the connector
- Clean the appliance regularly each time you use it.
- For cleaning, use only mild non-abrasive maintenance products for stainless steel, soapy water or
dishwashing liquid with a non-abrasive sponge.
- Wipe the appliance with a damp cloth.
- Dry the appliance with a soft clean cloth.
- Never clean the appliance with a jet of water because leaks could cause irreparable damage to it.
- Never immerse the appliance, the cord or plug in water or any other liquid, to avoid electric shocks.
All manuals and user guides at all-guides.com
On/Off
Adjusts temperature
Appliance is working (pilot light on)
Appliance off (pilot light off)
Appliance in heating process (pilot light on)
Warm griddle plate (pilot light off)
Function