bora PL 540 Notice De Montage Et D'utilisation page 16

Operation
Switching the cooker extractor on
Open the cover of the extractor using the adjusting
wheel. Depending on how the cover was installed, this
will either be towards the left or right.
Turn the operating knob on the front panel clockwise to
level 1 to switch on the extractor.
You can regulate the extraction strength according to
your requirements, from level 1 for low-level extraction,
to level 5 for high-level extraction.
Important: The cooker extractor only works if the cover
is open.
If the cover is closed or only partially open, no
extraction takes place.
All manuals and user guides at all-guides.com
Switching the extractor off
To switch the extraction mechanism off, turn the
operating knob to the zero position (until marker points
upwards). Only close the cover once you feel no more
air draught. .
1
2
16
GB