After Treatment
1. After treatment, apply cream to your feet so that your
skin becomes soft and tender.
2. Clean the device after each use with the cleaning brush that
is also supplied (see the "Cleaning and Storage" chapter).
Cleaning and Storage
CAUTION
❐ Make sure the device is switched off!
❐ No liquid must be allowed to enter the main unit. Do not
immerse it in water or clean it under running water!
❐ Do not use any caustic or abrasive cleaning agents or
cleaning pads to clean the device.
For hygiene reasons, the device should be cleaned
after every use.
1. If you have not already done so, remove the protective
ring and the attachment that has just been used from the
main unit (see the "Putting the Device into Operation"
chapter, "Attaching / Removing Attachments" section).
Grinding Attachment
2. Take the grinding attachment apart. To do this, turn the
grinding disc anticlockwise and remove it from the holder.
30
All manuals and user guides at all-guides.com