Polishing - pedimaxx TV80038 Mode D'emploi

4. Apply the rotating grinding attachment to the callus which
is to be removed and move the device over the callus with
small circular movements.
Move the device slowly and without pressure.
If you press the device too strongly against your skin,
the attachment will come to a stop in order to prevent
skin injuries.
5. From time to time, check the area you are treating to
avoid penetrating your skin too deeply and causing injuries.
6. Treat each foot for about a minute until you have removed
the thick layer of calluses. Then switch off the device, wait
until the grinding attachment has come to a standstill and
remove the protective ring and the grinding attachment
from the main unit.

Polishing

1. Attach the polishing attachment to the main unit
(see the "Putting the Device into Operation" chapter,
"Attaching / Removing Attachments" section, "Polishing
Attachment" paragraph).
2. Switch the device to the desired speed setting and polish
the previously treated skin. Proceed here in the same
manner as when using the grinding attachment (see the
"Coarse Removal of Calluses" section, steps 4 and 5).
Treat the skin until it is smooth all over.
3. Then switch off the device, wait until the polishing
attachment has come to a standstill and remove the
protective ring and the polishing attachment from the
main unit.
All manuals and user guides at all-guides.com
29