White&Brown LORENZO EX 825 Mode D'emploi page 12

All manuals and user guides at all-guides.com
EX_825_ notice 6/11/06
HOW TO OPERATE TO BREW COFFEE.
STEP 1: Open the Water Tank Cover (C) and take out the Water Tank (B). Fill Water Tank with
appropriate fresh,cold water and replace it , and then close the Water Tank Cover.
Alternatively, use the other container to directly fill appropriate water into the Water Tank
without taking it out, and then go to the Step2. [NOTE: Always observes Water Tank (B) to
make sure adequate water within it during the brewing process.]
STEP 2: Plug Power Cord to the power and press down Power Button (N), then the Power
Light (M) and the Coffee Light (O) will come on simultaneously.
The coffee light. (O) will go off once temperature reaches certain value, now please insert
the valve cover(J) and filter(k) into the funnel bracket (I) in the order indicated.
NOTE: There are three protrusions in the edge of the filter and three gaps in the edge of
Funnel bracket, please let protrusion match gap so to have them fitted well.
USING COFFEE POWDER:
STEP 3: Using coffee powder.
Please note that there are two marks
in the filter ,the below mark is 7g
coffee Powder mark, the above one
is 14g .Prepare the coffee powder
and fit the appropriate amount
into the Filter (K). Tamp the coffee
powder with Presser(L).
21:01 Page 12
1 cup
Using 7g coffee powder
USING PAD:
First place the gasket (x) in the bottom of filter, then put the coffee
pad.
12
2 cups
Using 14g coffee powder