ALPATEC HU 60.1 ET Mode D'emploi page 11

All manuals and user guides at all-guides.com
notice_hu60.1_et 29/03/07
Trouble
LCD screen does not
light on.
There is no mist
LCD screen lights on but
there is no mist
The mist spray has an
unpleasant smelling.
Mist volume is low
There is a strange noise
12:21 Page 11
TROUBLE SHOOTING
TROUBLE SHOOTING
Possible problem
- Is there a problem with power
supply.
- The plug is not connected to the
socket
- No water in the tank.
- New appliance.
- Water is dirty or has been too much
time in the water tank.
- The transducer is dirty.
- Water is dirty or has been too much
time in the water tank.
- Water tank is not properly placed
on the base.
- Water level in the tank is too low.
11
Treatment
- Insert the plug again.
- Add water.
- Open the water tank, lay it for 12
hours in a stady and cool place.
- Clean the water tank and add clean
water.
- Clean the transducer as described
in cleaning instructions.
- Clean the water tank and add clean
water.
- Set the water tank properly.
- Add water.